Rings and Mounts

Showing 1–12 of 29 results

  • Optic Mount

    Scalarworks LEAP/08 Mount 1.57 Inch Optic Center Height 30mm Dual Ring Scope Mount Cantilever Riflescope Mount

    Rated 5.00 out of 5
    Original price was: $56.90.Current price is: $48.90.Earn up to 12 points. Select options This product has multiple variants. The options may be chosen on the product page
    • State of the art 30mm scope mounts. The lightest, stiffest, and easiest to use quick-detach scope mount available. LEAP/08 redefines the standard for mounting your 30mm LPVO or high powered scope to your Picatinny rail
    • 1.57” optic heights
    • LevelDrive. Level your scope in seconds not hours
    • Expandability. Side KICK – Supercharge Your Scope with a Perfectly Offset Red Dot Sight
    • FIGHT LIGHT. Engineered to be the lightest 30mm Scope mount, without compromising an ounce of strength. Precision CNC machined from all six sides out of a single piece of 7075-T6 Aluminum billet to ensure the highest strength-to-weight ratio
    • Form Follows Performance. The LEAP/08 base incorporates different structural elements to maximize overall performance. A large diameter tubular section up front to resist torsion from side impacts, and a very wide I-beam bridge in the rear to resist recoil induced oscillations
    • Every Leap mount is CNC milled from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations
    • Mk2 Ring. Twice as many knuckles and double the material thickness as the original. Won’t get in your way of viewing or manipulating your scope’s adjustment turrets. Eliminates the uncertain and tedious setup required by traditional split rings
    • Smooth is fast. LEAP mounts have no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings
    • ClickDrive. The world’s most efficient quick-detach. ClickDrive’s low-profile thumbscrew and low-friction telescoping clamp require only the torque from your bare hand to securely attach onto a rail. An integrated spring-loaded ball-detent exerts enough force against the crown to make it completely recoil proof
  • Optic Mount

    30mm 7075 Aluminum Scope Mount HK24-066 Quick-detachable Scope Ring Mount

    Original price was: $90.00.Current price is: $71.90.Purchase & earn 18 points! Add to cart
    The Scope Ring Mount SYSTEM series of mounts feature eight set of interfaces to attach any of more than 40 different accessories and has
    a bubble level integrated in the rear plane of the mount body to prevent canting .
    The mounts are machined from7075 T651 aluminum and all aluminum parts are hard coatanodized, It make the product can bear up to 1000G shockproof, better adapter to each gun
    The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion resistance
    The screws come pre-waxed from the factory to ensure proper torque values.The mount is shipped with a manual and a “wedge” leveling
    This is a quick detachable version of the SP-4616, designed for use with 56 mm objectiveson and has an absolute co-witness with back-up iron sights.
    The Mount will fit most 30 mm scope tubes except for scopes with extendederector housings.
  • Accessories

    A-0029 Wilcox RAPTAR Adapter Picatinny Rail Mount

    Original price was: $39.00.Current price is: $27.90.Purchase & earn 7 points! Add to cart

    Worldwide Shipping & Custom Branding Support — Original Logo Products Available with Professional Delivery Services from Postal Service, UPS, FedEx, and DHL.

  • Optic Mount

    Best 11mm Dovetail Scope Rings H33.7mm

    Original price was: $11.90.Current price is: $9.90.Purchase & earn 2 points! Add to cart
  • Optic Mount

    Best ACOG Mount Height LT100 QD Mount

    Original price was: $33.90.Current price is: $25.90.Earn up to 6 points. Select options This product has multiple variants. The options may be chosen on the product page
  • Accessories

    Best Scope Throw Lever for Sale Switchview Riflescope Accessories

    Original price was: $11.90.Current price is: $9.90.Earn up to 2 points. Select options This product has multiple variants. The options may be chosen on the product page
    • Blazing-Fast Magnification Changes: The Switchview Scope Throw Lever lets you adjust scope power in seconds without removing your eye from the scope, ideal for dynamic hunting, tactical scenarios, or fast-moving targets
    • Effortless Zoom Control: Delivers maximum leverage for smooth, easy magnification adjustments—requires little to no force, even with gloves or in high-pressure situations
    • Universal scope throw levers: Available in various specifications –Designed to mount directly over the power ring of most rifle scopes (Available in 42mm/46mm/48mm inner diameter options), enhancing the versatility of your existing optic setup
    • Rugged Lightweight Construction: The rifle scope throw levers crafted from hard-anodized aluminum, this durable accessory is built to withstand recoil, harsh weather, and heavy field use—matching the longevity of your rifle
    • Tool-Free Simple Installation: Slides easily over your scope’s power ring for instant setup; no extra tools or modifications needed, getting you ready to shoot in seconds
  • Optic Mount

    BOC C1 Modular Mount RMR Mount T2 Mount

    Price range: $34.90 through $46.90Earn up to 12 points. Select options This product has multiple variants. The options may be chosen on the product page
  • Optic Mount

    BOC Condition One Modular Mounts 1.54 inch Optical centerline height 30mm/34mm C1 Rifle Scope Mount

    Price range: $34.90 through $119.90Earn up to 30 points. Select options This product has multiple variants. The options may be chosen on the product page
    • Modular Central Hub Design: The Condition One Modular Mounts C1 mount acts as a dedicated accessory hub, featuring four strategic mounting points (left, right, front, aft) on the Unimount body. Freely attach lights, lasers, red dot sight, or other accessories without cluttering the handguard, eliminating deflection common to add-ons mounted directly on rails
    • Consistent Height & Offset System: Unlike traditional ring-cap accessories, C1 modular mounts maintain uniform height and offset across all main mount heights. Ensures a familiar, repeatable shooting position and reticle alignment across different rifles or optics setups
    • 1.54” Ideal Height for NVG Integration: This BOC Condition One Modular Mounts Specified at 1.54” (the industry standard for in-line Night Vision Devices), this variant delivers a perfect cheek weld for precision shooting. Enables seamless pass-through of night vision while keeping the optic aligned for optimal visibility
    • Rugged 7075-T6 Construction: The Badger Ordnance C1 Mount Crafted from high-strength 7075-T6 aluminum with a Type III Hard Coat Anodized finish. Built to withstand heavy recoil, extreme weather, and rigorous tactical use, ensuring zero shift or loosening
    • Complete Accessory Mounting Kit: The rifle socpe mount includes an Offset Optic J-Arm Base with pre-installed mounts for RMR (Mount 1) and Micro Red Dot Sights (Mount 2), plus a precision wrench and hardware. Everything needed for a complete, tool-ready installation
  • Optic Mount

    C1 Modular Mount Condition One Rifle Scope Mount with Offset Optic J ARM Base/T2 Mount/r-m-r Mount

    Rated 5.00 out of 5
    Price range: $69.00 through $119.90Earn up to 30 points. Select options This product has multiple variants. The options may be chosen on the product page
    • Maximize Rail Space & Versatility. This rifle scope mount with the modular design with four accessory mounting points (left, right, front, and rear) allows you to attach essential accessories directly to the mount, freeing up valuable rail space and creating a streamlined setup.
    • Rock-Solid Stability & Eliminates Deflection. Mount optics or lasers directly to the C1 1 Piece Picatinny Scope Mount, eliminating the potential for deflection often seen with handguard-mounted accessories, ensuring consistent accuracy and zero retention.
    • Consistent Accessory Placement. This rifle scope mont unlike traditional ring caps, the C1’s modular system maintains consistent height and offset across different mount heights, providing a familiar and comfortable shooting experience regardless of the optic used.
    • Ideal for Heads-Up Shooting & Night Vision. The C.O.M.M. 34 MM 1.93″ Assaulter Height riflescope monts fit for 34mm tube,1.93″ height provides a comfortable, heads-up shooting position, perfect for faster target acquisition and improved situational awareness. It also ensures compatibility with night vision systems and gas masks.
    • Lightweight & Durable Construction. Crafted from robust 7075-T6 aluminum with a Type III Hard Coat Anodized finish, the C1 One piece scope mount rifle scope rings offers exceptional durability and corrosion resistance while remaining lightweight at only 6.5 oz.

     

  • Optic Mount

    LEAP08 Rifle scope mount 30mm Cantilever Scope Mount 1.57

    Original price was: $49.00.Current price is: $41.90.Purchase & earn 10 points! Add to cart
    • The Cantilever scope mount is design to solve the eye relief and charging handle clearance problems inherent to modern sporting rifles like the AR-15. It  provides a strong,reliable,and ergonomic way to correctly position an optic without modifying the rifle’s core components.
    • The Haike 30mm Cantilever scope mount is made of 6068 aluminum material. And it is processed and formed as a whole by precision CNC machine. Which make the mount can bear up to 1000G high impact resistant, have better performance when you use like rifle these real weapons.
    • The product is euqiped with a patent tech Level-Drive. There is an integrated set-screw on the bottom cantelever of the mount, which can let you square your scope with your mount in record time
    • With the 180 degree rotation ring design, you can open the mount at a big window and it is easy for you to mount your scope quickly, meet fast shooting demand
  • Accessories

    Low Profile Picatinny Anti cant Bubble Level

    Original price was: $12.90.Current price is: $9.90.Purchase & earn 2 points! Add to cart
  • Optic Mount

    Metal Scope Mount 34mm Tube Tactical Scope Ring Fit 21.2mm 1.93″

    Price range: $34.90 through $119.90Earn up to 30 points. Select options This product has multiple variants. The options may be chosen on the product page
    • The 34mm tube tactical scope ring manufactured by higher level Aluminum (7075 Alu) material, make the product can bear more higher impact, support more stringent usage environments
    • Professional CNC integrated cutting and forming, ensuring high impact resistance of the final product, more precise machining accuracy also is guaranteed. It can better cooperate with precision sights.
    • The side with the RMR-/RMSC- footprint base is design for multi-type Mirco red dot so that the shooter use the optic scope also can work with a red dot reflex sight
    • The mount is based on a 1.93 inch center height and use for 34mm tube size optical scope

     

Chat on WhatsApp
Scroll to Top